Hours vary Denver (720) 951-4619
All Electric
Glendale's Go-To Licensed Electrician: 468 Reviews, 4.9 Stars

Family-owned · Denver Local

Glendale's Go-To Licensed Electrician: 468 Reviews, 4.9 Stars

CO License #ME.0600978, fully insured electrical work for Glendale homes and businesses.

Free estimate

Tell us what you need

Three fields. It reaches a person here, not a call centre.

No obligation · Responds within 1 business day


By submitting this form you agree that we may contact you about your request and share your details with partner companies for marketing purposes.

Electrician in Glendale Who Explains the Work

When you need an electrician in Glendale, CO, the most important thing you can verify is the license. All Electric holds Colorado Electrical Contractor License #ME.0600978, carries full insurance, and backs every job with a one-year labor warranty. We're not a general handyman operation. We're a licensed electrical contractor with 9 years in the trade and 468 Google reviews averaging 4.9 stars. Call (720) 951-4619 to get on the schedule.

Glendale sits right inside the Denver metro, and our team runs calls there regularly. The city's mix of dense multifamily buildings and older commercial corridors means electrical work here often involves tight panel locations, aging wiring, and permit coordination with the City of Glendale's building department. We know the local inspection process, and every job we pull a permit on gets finished to code, no shortcuts that cost you at re-sale or re-inspection.

Our Services

Electrical Work We Do in Glendale Glendale

From a tripped breaker to a full panel replacement, here's what we handle in Glendale every week.

01

Panel Upgrades

Glendale's older apartment buildings and mixed-use properties often run on 100-amp panels that can't handle modern loads. We upgrade to 200-amp service, pull the permit, and schedule the inspection, all under one roof. Check our notes on electrical panels and breaker boxes if you're unsure whether yours needs attention.

02

Electrical Repair

Outlets that stopped working, breakers that won't hold, lights that flicker. These aren't cosmetic problems. They're warning signs. Our electrical repair work starts with a real diagnosis, not a guess.

03

EV Charger Installation

Glendale has a growing number of EV drivers in its denser housing stock. If your unit or building doesn't have a dedicated 240V circuit for Level 2 charging, we install one correctly, with the right breaker sizing and a permit on file.

04

Remodeling Electrical

Kitchen or bathroom gut-jobs need a licensed electrician before the drywall goes back up. We work with Glendale contractors and homeowners on kitchen and bathroom electrical remodeling from rough-in through finish trim.

05

Circuit Breakers and Dedicated Circuits

Adding a home office, a second refrigerator, or a new appliance often means adding a circuit. We size and install circuit breakers and dedicated lines to code, so the panel isn't overloaded and your warranty isn't voided.

06

Troubleshooting

Intermittent electrical problems are the hardest to find and the easiest to ignore until they aren't. Our troubleshooting electrician process traces the fault to the source, not just the symptom.

Why Glendale Homeowners Call Us First Glendale

panel upgrades work, project example in Glendale, AZ
Daniel Vargas started All Electric nine years ago with a straightforward approach: show up, diagnose it correctly, explain what you found, and fix it to code. That's still how every job runs. Glendale customers have left 468 reviews averaging 4.9 stars on Google, not because we promised the most, but because we delivered what we said we would. We don't subcontract. The person you book is the person who shows up. Daniel holds CO License #ME.0600978, and every technician who works under that license is accountable to the same standard. If you've been burned by a contractor who disappeared after the rough-in or left a job open past the permit deadline, we understand why you're reading the fine print. You should be. Call (720) 951-4619 and ask us anything before you book. Financing is available for larger jobs like panel upgrades and generator installs. Every completed job carries a one-year labor warranty. We don't consider that exceptional. We consider it the minimum you should expect.

How It Works

Booking an Electrician in Glendale

Three steps from first contact to finished work.

  1. 01

    Call or Book Online

    Reach us at (720) 951-4619 or use the online scheduler at /book-an-appointment. We confirm availability for Glendale same day or next business day in most cases.

  2. 02

    Diagnosis and Estimate

    We arrive, inspect the issue or scope the project, and explain what we found in plain language. No pressure, no jargon. Every job is different, contact us for an accurate estimate.

  3. 03

    Licensed Work, Permitted Where Required

    We pull permits when the work requires it, coordinate with Glendale's inspectors, and finish every job to Colorado code. You get a one-year labor warranty on completion.

Straight from Google

What Glendale-Area Customers Say Customers

4.9468 verified Google reviews
Got the job done well, pleasant to work with.
Brian NicholsBrian NicholsSep 2026 · Google
All Electric is the best! Knowledgeable in fair and troubleshoot till they get the job done, if needed. Highly recommend 🙌🏽
gina dgina dSep 2026 · Google
Fantastic service. They showed up, assisted in the repairs, found the underlying issues and fixed them and then explained what those issues were in a manner that I could understand. Top service, as always.
Sean FrohlingSean FrohlingAug 2026 · Google
Same day service! Was here in 3 hours. Very honest and charge was kept at the minimum. Polite service as well.
Fred LudlowFred LudlowAug 2026 · Google
Very responsive. Easy to work with. Would definitely recommend to friends and family.
BritneyBritneyAug 2026 · Google
Electrician came out the next day after calling to install two light fixtures. Minimal issues and got them both installed successfully even though we have an old home. Pricing was reasonable to me. I will definitely be using them again for any similar needs!
Jillian L. CallaghanJillian L. CallaghanAug 2026 · Google
Awesome service. Quick prompt and very professional and knows the business. Daniel Vargas was the Master Tech. Accessed the problem and was quick to diagnose! Two faulty breakers. Highly recommend.
Michelle BakerMichelle BakerAug 2026 · Google
Daniel was great - solution-oriented, super-responsive, knowledgeable and really nice to work with - I will look to Daniel aand All Electric for future needs - thanks!
Travis BoganTravis BoganAug 2026 · Google

Electrical Problems That Get Worse When You Wait

  1. 01

    Overloaded Panels

    A 100-amp panel running a modern household load doesn't fail dramatically, it fails slowly, through heat buildup and nuisance tripping, until a breaker welds itself shut or a wire connection fails. By the time it's obvious, the damage is done.

  2. 02

    GFCI and Code Violations

    Pre-1990 kitchens and bathrooms often lack proper GFCI protection. That's a code violation and an insurance liability. It's also a straightforward fix. Sellers who skip it during pre-listing inspections get dinged harder at closing than the fix would have cost.

  3. 03

    Undiagnosed Flickering or Tripping

    Flickering lights and breakers that trip under normal load aren't inconveniences. They're symptoms. A loose neutral connection or a failing breaker can arc. Arcing starts fires. Call before it becomes an insurance claim.

Glendale Electrical: Common Questions

Do you pull permits for electrical work in Glendale, CO?
Yes. Glendale operates under its own building department, and permit requirements here follow Colorado state electrical code. We pull the permit, schedule the inspection, and handle the coordination. You don't deal with the city. We do. Any electrician telling you a permit 'isn't required' for panel work or new circuit installation in Glendale is either mistaken or cutting corners you'll pay for at resale.
How long does a panel upgrade take for a Glendale home or apartment?
Most residential panel upgrades in Glendale run one full day on-site, sometimes two if the existing service entrance needs rerouting or the meter base has to be replaced. The permit and inspection add a few days to the overall timeline, but the home isn't without power for that period. We coordinate with Xcel Energy for the utility reconnect and confirm the inspection date before we start. Every job is different, contact All Electric for an accurate estimate.
Can you install an EV charger at a Glendale apartment or condo?
This is one of the more common questions we get in Glendale given the density of multifamily housing here. The answer depends on the building's existing panel capacity and HOA or landlord approval. We've installed Level 2 chargers in both individual units and common parking areas. In some buildings, a sub-panel is needed first. We'll assess the existing service before we quote anything. Every job is different, contact All Electric for an accurate estimate.
What's the difference between a remodeling electrician and a general repair electrician in Glendale?
A remodeling electrician plans and installs new circuits, relocates panels or outlets, and works alongside other trades during a renovation. A repair call is typically a single fault or failed component. All Electric does both. If you're remodeling a kitchen or bathroom in Glendale, the remodeling electrician work needs to happen after demolition but before drywall, timing matters, and we'll coordinate with your general contractor if you have one.
Do you work on commercial properties in Glendale?
Yes. All Electric holds a Colorado Electrical Contractor license (ME.0600978) that covers light commercial work, not just residential. Glendale has a significant commercial corridor along Cherry Creek Drive, and we've worked in retail, office, and mixed-use spaces there. Commercial jobs typically involve three-phase service, higher-amp panels, and different inspection schedules than residential, we understand both. Call (720) 951-4619 to discuss your project.
What generators does All Electric install for Glendale homes?
We install standby and portable generator systems for Glendale homeowners and connect them through a proper transfer switch, never a direct connection to the panel, which is both dangerous and illegal. We're brand-neutral on generators, meaning we'll match the unit to your load requirements rather than push a preferred brand. Our whole house generator page has more detail on how the installation works. Every job is different, contact All Electric for an accurate estimate.
Does All Electric work on commercial properties in Glendale?
Yes. Colorado Electrical Contractor License ME.0600978 covers light commercial work. Glendale's Cherry Creek Drive corridor has a range of retail, office, and mixed-use buildings, and we've worked in all three. Commercial jobs involve different panel sizes, service configurations, and inspection schedules than residential. Call (720) 951-4619 to talk through your specific project.
What generator systems does All Electric install in Glendale?
We install standby and portable generator systems connected through a proper transfer switch, never a direct panel connection, which is unsafe and non-compliant with Colorado code. We're brand-neutral, so we match the unit to your actual load requirements. Every job is different, contact All Electric for an accurate estimate on generator installation in Glendale.

Schedule Your Glendale Electrical Job Today

Licensed, insured, and 9 years in the Denver metro. One-year labor warranty on every job.

Related